Fluid extractors are a dependable and effective way to remove fluids from the engine, transmission, differential, transfer case, or gearbox. They are relatively simple to use and maintain, making them perfect for marine engines. Fluid extractors are intended for use with hot engine oil, allowing the oil to flow more freely.

This small fluid extractor includes an 8-gallon tank and a 5-gallon suction capacity. A vacuum gauge is incorporated. It quickly checks the vacuum charge, and a sight gauge shows the tank level. The tank may be swiftly drained once the maximum fluid level is achieved.

Key Features:

• The extractor comes with six flexible probes and three adapters.

• It includes an eight-gallon tank and a suction capacity of up to five gallons.

• Fluid evacuates by pressurizing the tank with roughly 10 PSI of shop air.

• Simple to use.

• The equipment is robust and reliable.

Specifications:

• Brand: Liquidynamics

• SKU: 24224R

• Weight: 34.00 lbs

• Wheel Size: 7 inches

• Suction Hose: 6'

• Discharge Hose: 6'

• Operating Temperature: 104°F – 140°F

• Spout Type: Ball Valve

• Capacity: 8 gallons

• Fits: Mercedes, BMW, and VW

• Manufacturer Part Number (MPN): 24224R

• Alternate Products SKU: 24224, 24224R

• Replaces Product: 24224

Fluid extractors are a reliable and efficient method for removing fluids from most any engine, transmission, differential, transfer case or gearbox. They are extreemly easy to operate and maintain and are ideal for use with automobiles, trucks, tractors, farm machinery, marine engines, forklifts, industrial machinery and various other small engines. Fluid extractors are designed to be used with hot engine oil, i.e.; 104 deg. F to 140 deg. F, which allows the oil to flow more freely. This compact fluid extractor has an 8 gallon tank capacity with a suction capacity of 5 gallons. Vacuum charge is easily monitored by an included vacuum gauge while tank level is visible via a sight gauge. Once maximum fluid level is reached, used fluid can be quickly emptied by pressurizing the tank with approximately 10 PSI of shop air. A shop air supply of approximately 100 PSI @10CFM is required to create the vacuum. Once the vacuum is created this unit can be used independent of the air supply. The extractor is supplied with a set of six flexible probes, three adapters (To fit Mercedes, BMW and VW), 6' suction hose and 6' discharge hose. WARNING: NOT FOR USE WITH FLAMMABLE, CORROSIVE OR EXPLOSIVE FLUIDS.

This product replaces:

24224